#Molex connector led strip Pc

Next, insert the LED controller cable between the socket on the fan labelled IN and the LED controller’s rear port. Swap out your existing fan(s) for the RGB model, then connect the fan’s power cable to an appropriate header on your motherboard. The NZXT Aer fan is available in 120mm and 140mm sizes, each packing eight individually controlled LEDs.Īgain, remember that each port on the HUE+ controller can support up to four LED strips, which means you can daisy-chain multiple RGB case fans if you wish. Alongside the standard four-pin power cable that’s used to spin the blades and monitor speeds, an additional controller cable is required to connect the fan to your lighting controller. Installing an LED-rocking case fan is similar to installing any other fan, with one additional step. You can fine-tune their location later, but for now, lets move on to the Aer RGB fan. Terry Walsh/IDGĮnsure that the arrow printed on the four-pin extension cable is correctly aligned with the black line on the LED strip.Ĭontinue routing the extension cables between the LED strips until they’re all connected. Ensure that the arrow on the connector lines up with the black line on the strip when you hook everything up, otherwise there’ll be no light show. Each connector has an arrow pointing to one of its four pin sockets. You’ll notice that each strip has a black line running along one edge. This helps you connect the cables correctly-don’t ignore it! Note the black line printed on one side of each LED strip. Position your strips where desired (I placed mine around the side window of my case) and then run one extension cable from the first port on the controller to the nearest LED strip connector. The HUE+ includes 100mm, 300mm, and two 500mm extension cables, which are used to connect the individual LED strips. While connecting the strips to the controller is very simple, now’s the time to figure out the ideal location for your LEDs and how you’ll route the wiring. I’ll use one port to connect the strips supplied with the HUE+ and the second port to connect and control the Aer RGB fan. Each of the two four-pin ports on the HUE+ controller is able to support four, daisy-chained LED lighting strips.

NZXTĪn asymmetric, nine-pin header layout makes it simple to connect the USB cable.įinally, we come to the LED strips themselves. The great thing about these connectors is that they only fit one way, so it’s relatively easy to slip the connector over the pins. This connects to your motherboard (or USB hub, if required). You’ll notice that this cable has a regular Micro-USB connector on one end and, at the other, a female connector block that’s designed for a nine-pin USB header. Next, it’s the turn of the Micro-USB cable.

#Molex connector led strip Pc

Together with the integrated LEDs on the NZXT Kraken X62 Liquid Cooler ( available for $129.99), which I’ll discuss in a dedicated installation guide, we have the makings of a vibrant, color-saturated desktop PC that deserves a place on /r/battlestations. Today, I’m installing the NZXT HUE+ controller (which retails for $59.99) along with the HUE+ Extension Kit (which costs $20.99) to power three HUE+ light strips and an Aer RGB fan ( available for $29.99) that will be installed at the rear of the case. Just as a fan controller regulates power and spin speeds of your case fans, a lighting controller manages power and color synchronization of LED lights. If you’re retrofitting an existing PC with LED lights, powering and synchronizing multiple components is made far easier with a dedicated lighting controller. Ultraviolet light strips can add a glow to cables and components.